 |
The Trigger Control Unit (TCU) can be used with a variety of sensors to automatically set off an Explosive Blast Simulator. The TCU uses the same 315 MHz transmitter that comes standard with the Explosive Blast Simulator. Wire leads connect the TCU to the sensor of your choice or you may purchase the TCU without a sensor so you can attach your own. The more popular style of sensors include pressure pads, motion detectors and trip wires, but we realize your training needs may very well be different and we offer almost any customization needed of our products to fulfill your training needs. |
 |
The Sunbrella Cover is available in essentially any solid color and can be used to cover and conceal
the X-02 Explosive Blast Simulator even during operation.
Note: Cannot be used with the XSM1 Smoke Attachment during use! |
 |
The XSM1 Smoke Attachment is available as a factory option or as a retrofit fit for later model X-02s. The XSM1 uses Smoke Candles to automatically produce 40,000 cu ft of light gray smoke for 3 minutes after firing (Click Here For Video). |
 |
Smoke Candles can be used with the XSM1 Smoke Attachment or by themselves. Each Smoke Candle produces 40,000 cu ft of smoke for 3 minutes. The candles are not an explosive and have no special storage requirements other than they need to be kept in a cool dry place. |
826 B Denton Blvd
Fort Walton Beach, FL 32547
850-862-5344 | 850-243-5279 (fax)